Back to News
Advertisement
Advertisement

⚡ Community Insights

Discussion Sentiment

88% Positive

Analyzed from 1196 words in the discussion.

Trending Topics

#tesla#car#electric#mustang#fsd#body#more#model#conversion#classic

Discussion (48 Comments)Read Original on HackerNews

sottolabout 3 hours ago
I really like the look of the car, but from the title it sounds like a Mustang has been converted into an FSD Tesla ("teslafied" Mustang) - but Tesla suspension, Tesla interior... this smells like a Mustang body fitted onto a Tesla chassis ("mustangified" Tesla).

I suspect that this might be more of a "Mustang body kit" on a Tesla chassis and not retrofitting the Tesla tech into a Mustang chassis + body. Still cool, but maybe misleading.

public_voidabout 2 hours ago
I used to work at a company that did self driving. The sensor setup was more complicated than Tesla (cameras, lidar, etc), but the fact that FSD can still work on this car despite the cameras being in a different place is really impressive to me. Our sensors were pretty sensitive to accurate calibration, and iirc any time we tried to move our sensor array to a new car it took a ton of work to reconfigure it to make the sensor fusion output work.
Induaneabout 1 hour ago
This is one of the real advantages to the (often insulted and/or chastised) vision only approach to FSD.

People can easily adapt to different vehicles in a similar manner.

amluto13 minutes ago
I’m not sure this has much to do with vision as opposed to fancy self-calibration software. At least a few years ago, Tesla cars would be in self-calibration mode for a while after delivery while they calibrated their cameras. I think the idea is that it’s cheaper to figure out in software where everything is than to calibrate the camera mounts and lenses at the factory.

I see no reason that LiDAR couldn’t participate in a similar algorithm.

A bigger issue would be knowing the shape of the car to avoid clipping an obstacle.

SoftTalker23 minutes ago
It would be cool if we saw the separation of drivetrain from body in the automobile market. This happens with heavy trucks, you can buy a "glider" which is a completely new, finished rolling chassis and you provide your own engine. Originally done (I think) to skirt emissions laws but it would be cool to be able to buy the body and the EV drivetrain (and maybe battery packs?) from different vendors, and for EV drivetrains to be more easily fittable to older chassis.
AngryDataabout 3 hours ago
From the article it sounds like the inverse, they took a Tesla and stuck a classic car exterior shell on it, not transplant the electric car parts into a mustang frame. It is still kind of neat but is not the same thing to me. You don't normally upgrade a classic car by chopping out the entire frame and sticking the body panels onto a modern car.
ryan42about 3 hours ago
Here's one of a fully custom Toyota 4x4 truck getting a Tesla Model 3 motor that I enjoyed. I would love to have a small electric pickup like this, but I don't want to invest $100k to get it done

https://www.youtube.com/watch?v=siEhd4Z-6Ts

hnavabout 3 hours ago
Retro-electric stuff makes so little sense since it's the worst of all worlds. Part of why Teslas get decent range is the slippery body. I wince every time I see people clamoring for the VW Scout reboot. Rivian too with their 140kwh batteries just to give people that nostalgic body-on-frame SUV look with usable range.
olyjohnabout 2 hours ago
[delayed]
sedatk17 minutes ago
It should've been a black Pontiac Trans-Am.
deepspace14 minutes ago
A Mercedes Benz 770K would have been even more appropriate.
condimentabout 3 hours ago
This sort of conversion gets coverage every once in a while and it's been neat to see old frames getting chopped onto new electric drivetrains. I spoke with one of the people interviewed in this article[1] a couple years back about converting an old truck I have sitting around into an EV.

The Model 3 approach takes their unified rear axle (motor,axle,wheels) and mounts it into an existing frame. Then you just need to find a place to stuff the batteries, retrofit some high-voltage electronics, and you're off to the races. One of the drawbacks of that approach is that it changes the stance of the vehicle, but for this Mustang that doesn't seem to matter much - it still looks classic.

Other converters either go for the high end with a model S and fit the motor into a traditional drivetrain for a sleeper build, or they go for the low end and take an old forklift motor and batteries and build what is effectively a street-legal golf cart. Prices range from $5-100k depending on your level of DIY and how dangerous of a classic car you want on the other side of the process.

[1] https://coloradosun.com/2023/06/25/classic-cars-electric-veh...

loegabout 3 hours ago
> It’s likely the first non-Tesla vehicle to run FSD, and it achieves 258 Wh/mi — roughly matching the efficiency of an actual Model 3.

This claim is implausible, right? The Mustang is unambiguously less aerodynamic than the Model 3; there's no way it is achieving similar efficiency, especially at highway speeds.

wishinghandabout 3 hours ago
I’d love to do something similar to an El Camino. I don’t even need triple digit range; I’d use it as a local runabout, mostly to my art studio.
entropicdrifterabout 3 hours ago
A lot of people use Leaf batteries/powertrains for this type of conversion. Probably would be cheaper than using Tesla parts if you don't need as much range.
beedeebeedeeabout 3 hours ago
Neat. I would have preferred the original interior over Tesla's, but I guess it would then just be an electric conversion and not a "Tesla" conversion with "FSD".
Advertisement
jazzyjacksonabout 3 hours ago
Whatever happened to the electric delorean reboot?

EDIT: at one point whoever owned the name also owned a warehouse of spare parts and was going to produce an electric retrofit kit for the old vehicle, and hinting at manufacturing new ones a la retromod. Whoever owns the name now just has concept rendering on their site and a Solana token, so, little more than a meme coin now :(

anotherhueabout 3 hours ago
rootusrootusabout 3 hours ago
That's really cool, though I confess I would have preferred the interior to have been more Mustang and less Model 3. Just a quibble, though, the effort is fantastic.
LurkandCommentabout 3 hours ago
I've been waiting for someone to do something like this as long as I've known electric cars to be a thing. I hope they just start making them like this.
loegabout 3 hours ago
People have been doing Tesla powertrain swapped vehicles for a long time. Here's a Jaguar from 5 years ago: https://www.youtube.com/watch?v=DxxaHYlCuN8
dainiusseabout 2 hours ago
Why destroy this beauty
codezeroabout 2 hours ago
To keep it alive
jefuriiabout 2 hours ago
When will I be able to get an affordable restomod for my early-2000s Jetta?
t1234sabout 3 hours ago
I wonder if tesla will see this and try to invalidate the VIN from using FSD
rootusrootusabout 3 hours ago
That would be a pretty shortsighted move from a PR standpoint. Nobody is going to blame a restomod FSD wreck on Tesla. But turning off FSD remotely just reminds everyone that Tesla can and will take control of your car.
yabooeyabout 3 hours ago
This is such a waste of time and money and wow it’s absolutely gorgeous and I want it
annoyingnoobabout 3 hours ago
Interesting, love the concept. Don't love the modern interior.
sublinearabout 4 hours ago
> It demonstrates that Tesla’s hardware and software stack is more portable than the company’s licensing struggles would suggest.

Unless I missed something, this is a completely unsupported claim by the article. Passion projects and retrofits are nothing at all like manufacturing.

beedeebeedeeabout 3 hours ago
The article claims that the whole project only cost $40,000, and then compares that to electric conversion offerings that cost $75,000 (and mentions that the global conversion market in 2024 was $5.9 billion). I think the implication is that there could be a large market for FSD conversions that goes beyond passion projects because it is not only possible but affordable.

I would be surprised however if this project only cost $40,000, when you factor in the cost of labor and maintaining a facility to do this work.

flutasabout 3 hours ago
It's specifically talking about the "FSD" model under the hood being able to run on this retrofit even though the cameras don't align 100% like they originally would.
drdebugabout 3 hours ago
Nice work, but is it just me or does this take away from the car’s original spirit?
rootusrootusabout 3 hours ago
You are entitled to your opinion, obviously, as is anyone else. Restomods have been around since forever, and this is hardly the first EV conversion (almost certainly not the first classic Mustang EV restomod either).

Personally I think it's pretty damn cool. But I have always been a Mustang fan, and I know that this era of Mustang is not especially collectable. They made quite a large number of them and plenty are still running.

Advertisement
gedyabout 2 hours ago
I know this is not the way the industry or regulations work, but I wish electric car platforms let you pick body styles without waiting for a whole model to come out. I'd love an electric Suzuki Jimny body, and could care less about the driving platform.
dmixabout 4 hours ago
People have been doing these conversions forever with teslas.
AndrewKemendoabout 3 hours ago
There was a shop in Dallas back about 20 years ago that did an electric conversion of a H1 Humvee. Since then there’s been lots more conversions like that and to me that is a valid recycling business.
actionfromafarabout 3 hours ago
Oh, a good looking Tesla.
zthrowawayabout 3 hours ago
As a classic car owner/hobbyist, this disgusts me. But thankfully there are at least 200k other restored/restorable 60s Mustangs out there.
hnavabout 3 hours ago
Good news is that you can get a brand new 66 shell stamped in Taiwan for about 20k.