Back to News
Advertisement
Advertisement

⚡ Community Insights

Discussion Sentiment

63% Positive

Analyzed from 2445 words in the discussion.

Trending Topics

#bike#battery#more#bikes#motor#power#ebike#drive#https#hub

Discussion (93 Comments)Read Original on HackerNews

bri3dabout 3 hours ago
Friction drive e-bike conversions were popular years ago.

They generally:

* Wear tires surprisingly quickly

* Absolutely suck in any form of weather or terrain condition (dirt, rain, etc.)

* Have ~20% less efficiency than any other drive form.

But, they are easy, and they do work.

MisterTea2 minutes ago
Are there any mechanically coupled solutions that can be field installed by the owner?
molsongolden5 minutes ago
This bike booster will probably come in at less than half the cost but the Bimotal kit is another option that doesn't have the tire wear issue, offers better performance, and the form factor is much nicer.

https://bimotal.com/products/elevate

Fnoordabout 1 hour ago
Looks like you can't have a passenger anymore either. I like to have my kid on the backseat of my e-bike.

I'm not in the market for this, but I am in the market for making my cargo bike electric. Having to slow down at a traffic light and then start from zero absolutely sucks. It goes very slow, it is rough, and you won't have time. I'd use it just for that specific use-case.

ryukoposting24 minutes ago
And, don't forget: easy to steal off even a well-secured bicycle.
calmbonsaiabout 2 hours ago
Yeah. I don’t see weather or theft addressed in this design.

I recall a wheel-mounted rotor system from a few years back that did address theft, tire-wear, and weather, but it suffered from far too little torque and very limited battery life.

neves32 minutes ago
Can't use with mud guards
rtkweabout 1 hour ago
It looks like their solution is to make it easy enough to install and remove you take it with you. My thought would be security bolts so the pool of thieves is at least limited to people with the right bolt head. Also it has a big battery built in so
SoftTalker4 minutes ago
Thieves will just take the whole bike.
tadfisherabout 1 hour ago
They could have made basically the same thing except with a sprocket to help drive the chain.
ryukoposting17 minutes ago
Chain moves side to side with gear changes, and adding extra chain tension with an extra drive sprocket could make the deraileur angry. Also, chain-tube geometry varies a lot. Not impossible, just more complicated than it might seem.

I ride an all-original 1970s steel-frame road bike, which seems like a prime candidate for this sort of product. I'm certain no sprocket-based design would fit it. I'd buy one of these if there was any way to lock it up.

Lord_Zeroabout 2 hours ago
I had a gas powered goped that worked that way years ago. Had all those problems but it was fun. The second you hit any water the drive shaft would just spin against the tire.
culiabout 1 hour ago
Personally I also don't see the niche they serve. If I'm going far away I take a train or a car. I pretty much exclusively use my bike to ride to a nearby grocery store or do other close-by errands. If I'm doing short errands like this, I really prize being able to get on and off quickly and lock my bike up quickly. A device like this needs to be taken with you when you leave your bike to prevent theft. It's a whole nother step and a lot of extra weight
edmundsautoabout 1 hour ago
Are you elderly, differently able, live in extremely hilly or hot terrain, or only willing to bike if it’s half the current effort?

That plus “already has a bike” is a massive market.

garciasnabout 1 hour ago
People who already invested in an expensive traditional bike and want to have the option to add electric support to make trips easier and faster without having to deal with selling their current bike and buying an even more expensive e-bike.

There’s also the fact that many people have bike racks that are fine for traditional bikes but not the additional requirements necessary for some (most?) e-bikes such as weight and strength.

—-

Just because it doesn’t work for you and your specific worldview doesn’t mean others wouldn’t see value in it.

whycomeabout 1 hour ago
When I read your comment before the article I thought it was some sort of complicated contraption in multiple parts. Instead it seems pretty compact and easy to disengage. I’m not sure what you’re missing in terms of a niche either. Anyone who just wants to ride with less effort but use their existing bike?
LeoPantheraabout 2 hours ago
Clive Sinclair designed one of these in the 90s. It actually sold reasonably well, but was limited by the available battery technology of the period.

https://rk.nvg.ntnu.no/sinclair/vehicles/zeta.htm

yazaddaruvalaabout 2 hours ago
Ouch, love to see a great product like this. However, hate to see that bike theft wasn’t discussed at all.

“Easy installation” with two screws seems like a benefit to customers except when they come back to their parked bike only to find their expensive mod also had a hidden feature: “easy uninstallation”.

NAR8789about 1 hour ago
loegabout 2 hours ago
In addition to the theft concerns, it's also not a great product.
user-about 2 hours ago
for the non bikers, to help us understand, whats wrong with it?
loeg44 minutes ago
Destroys tires, very limited range/power due to poor power delivery from motor to tire. Parasitic drag when coasting or battery is dead.
NegativeLatencyabout 2 hours ago
Limited power delivery, horrible in the rain, prevents using fenders
UqWBcuFx6NV4rabout 2 hours ago
They aren’t reliable or efficient.
schainksabout 2 hours ago
This product is for people who live in safe neighborhoods and bike a lot, aka not the average American.
amoorthy14 minutes ago
I just bought a Boost conversion kit from the UK and am excited to install it in a couple weeks. If anyone has installed this kit would appreciate a comment on the experience.

(I'm in the US and have been unimpressed with the kits available here. The Boost one looks compact and well designed).

NDlurkerabout 1 hour ago
If I ever convert my bike to electric, I'll probably go with this https://www.swytchbike.com/
low_tech_punkabout 1 hour ago
It is decoupled from drivetrain. So, without torque sensor, how does it know when the rider wants to speed up vs. slow down?
analog3139 minutes ago
It says it has a wireless cadence sensor. With that said, torque sensors were an improvement over cadence sensors.

To elaborate a bit, friends of mine have had bikes with both cadence and torque sensors. And I've tried their bikes out. Agreeing with one friend, the bike with the cadence sensor seems to decide how fast it wants to go.

The bike with the torque sensor behaves a lot more like what you're used to from riding a conventional bike. After all, the control input to a conventional bike is torque.

Helmut1000124 minutes ago
This would be great to add to my 9 year old's bike. We couldn't do long bike tours anymore because he would stop biking after 100m, telling is he is completely exhausted and must go home. I was looking for something like this!
theendisney15 minutes ago
They should turn it into a phone lan gaming platform with dedicated games. That would make it instantly awesome.
Zigurdabout 2 hours ago
A couple other people here mentioned that theft is an issue. That's yet another reason why folding bikes seemed like the best use case for this. Not as good as a folding bike that's made for being an E bike, but if you've already got a good folding bike and a bit more zip on your commute is what you need, this seems like a interesting product.
kiddicoabout 3 hours ago
That might be the easiest ebike retrofit/conversion I've ever seen. I have concerns about the grip in wet conditions but this looks like a great way to get that ebike I've wanted and not put my perfectly good frame to waste.
fwipsyabout 3 hours ago
Similar friction drives have existed for a while. The battery is very small compared to a regular ebike (typically they start at about 300wh.) Also, IIRC the friction drive is not very efficient.
itomatoabout 3 hours ago
Like when wet. Or icy or both.
davidwabout 3 hours ago
I think the number of people who want to use something like this when it's icy out is pretty small. You'd want studded tires, for instance... and it's generally those who are really committed who ride in those conditions. This looks more like 'dipping a toe in the eBike water'.
cowsandmilkabout 3 hours ago
This one is 158 Wh
fwipsyabout 2 hours ago
I saw. Most entry-level ebikes have at least 10ah * 36v batteries; a few lightweight models have 7ah. So this has about half the battery capacity of the cheapest ebikes.
loegabout 2 hours ago
Get a Bafang kit or a hub motor replacement rear wheel instead. At least those systems work well.
Pxtlabout 2 hours ago
I mean I agree but those aren't zero-skill install like this.
loeg20 minutes ago
Bafang isn't, sure, but a hub motor is relatively easy. I guess hub front motor is even easier than hub rear.
mongolabout 2 hours ago
Have a look at Bafang or Tongsheng kits
angry_octetabout 3 hours ago
If I'm carrying around a giant battery I ought to be able to charge my devices from it, but it is silent on that front.

The design doesn't work if you have a mud guard or pannier rack. Also unclear how easily it is detached. Do I have to take it off everytime to prevent casual thievery? How do I take it off to charge inside? Does it have anti-theft bricking?

I'm struggling to understand who the target market is.

rahimnathwaniabout 2 hours ago
"How do I take it off to charge inside?"

It has a removable battery so it seems the mechanism is designed to be left on the bike.

Advertisement
mannanjabout 3 hours ago
All these sites have hype about AI features like AI Chat. however I use the chat, and it wastes about 3-10 seconds just to load, then I ask for the price, and it fails to understand even the page we were on (edit: "I don't understand what product you're referring to, please tell me the product"). Then I literally paste the page's product from the page into the chat, and it finally wastes my time more and sends a whole essay blob about why it can't tell me the price.

Is this what investors sell to the board about how they are using AI for greater efficiency? Just to waste consumers time even more?

mohamedkoubaaabout 3 hours ago
It's fashionable and it takes strong leadership to avoid fashionable things even when they make absolutely no sense
arjieabout 2 hours ago
Haha, I like all these adapter designs though my favourite was the Copenhagen Wheel[0]. I saw someone ride one near Mission and S Van Ness and loved it. Sleek device. This particular one in the OP is definitely built for safe societies, right? Definitely not for the North American market, haha!

0: https://en.wikipedia.org/wiki/Copenhagen_Wheel

antonvs37 minutes ago
Basically, the Copenhagen Wheel moved all the complexity of setting up a hub motor drive system - motor, battery, controller, sensors, computer - into the hub shell itself.

Which made it seem neat and clean, but meant it had serious reliability issues, couldn't handle wet conditions[], wasn't really repairable, and was expensive compared to more reliable alternatives with better battery life, etc.

[] The manufacturer apparently stated that "[...bad bearings] can occur when the Wheel is repeatedly exposed to wet conditions. Due to the nature of the problem, this cannot be repaired": https://forums.electricbikereview.com/threads/known-issues-p...

card_zero11 minutes ago
Psst, you can escape an asterisk [*] with a backslash.

Hub gears work quite well though don't they? In particular respect of being sealed and protected from the weather. Unclear why there's an opposite effect for this wheel.

TylerEabout 2 hours ago
It went on sale in the US before the EU. Did you even skim the wiki page you linked?
arjie42 minutes ago
I see. The way I spoke made it seem like I was talking about the Copenhagen wheel with the phrase “this particular one”. I was talking about the OP device. Obviously since Mission and SVN is in the US I would have assumed it was not the CW but I can see that I was unclear so I have clarified. The Copenhagen wheel is pretty integrated. This one is a thumb screw and off you run with a valuable battery. I wouldn’t buy it here and I bike every day in the city.

People who don’t bicycle in North America won’t quite get it. It’s not exactly Taiwan. Theft is rampant and it’s societally sanctioned in most major cities.

amazingamazingabout 3 hours ago
Similar things are on amazon today 300-500. Not worth it imho. If you are going to keep it on, convert your bike with middrive or hub motor once.
dalmo3about 2 hours ago
Am I missing something or that thing can be trivially stolen?
theChaparralabout 1 hour ago
Bicycles in general can be trivially stolen.
gedyabout 3 hours ago
So ah, can we buy it? What's the price? Not seeing unless ad blockers are hiding something.
VoidWhispererabout 3 hours ago
According to articles like this one[0], they haven't shared pricing yet - so I guess it can't be bought quite yet.

[0]: https://www.digitaltrends.com/outdoors/asus-made-an-e-bike-c...

calvinmorrisonabout 2 hours ago
They aint new. I had one that was driven by a honda gx35 4 stroke

there was another company named "bee" something that did these (gas as well 2 stroke)

and many early scooters, conversions, that all followed the friction style

tokaiabout 2 hours ago
I love bicycle tech. Almost everything was invented in the 1890s, and every couple of decades someone tries another old idea.

https://onlinebicyclemuseum.co.uk/tour/cyclemotors-motorcycl...

kaladin-jasnahabout 2 hours ago
> Almost everything was invented in the 1890s, and every couple of decades someone tries another old idea.

What about wireless shifting systems like Di2?

lostloginabout 2 hours ago
> wireless shifting systems like Di2

Is it really wireless?

The SRAM one is.

analog3131 minutes ago
SRAM Automatix. ;-)
d--babout 2 hours ago
some bike vendor told me that the biggest problem with regular to ebike conversion was that regular bike frames were not strong enough to support the additional forces that the electric bike imposed. And it was why the ebikes were much heavier than regular bikes.

Does anyone know if that’s true and if that applies to conversions like this one?

analog3117 minutes ago
It's less of an issue for this device. The reason is that the motor is further from the axle than a hub motor would be. Thus, there's less force on the frame for a given amount of torque.
theendisney19 minutes ago
Interesting point. That might be the only thing this thing has going for it self. The angle of force is perfect even for the most fragile frame.
NegativeLatencyabout 2 hours ago
Depends on the bike and motor combo. Something like a mountain bike from the last 20 years would be fine, but I wouldn’t try and put one on like a road bike from the 70s or something. Basically anything that’s well built sturdy steel is going to be ok with the common sub kilowatt motors, but there are like crazy ones that will output considerably more power than that.

Also that’s going to be more applicable with a mid drive or a hub motor than something like this.

justsomehnguyabout 2 hours ago
Weight

3.7 kg (including battery)

righthandabout 1 hour ago
Anything for the world to actually avoid the health benefits of riding a bike. What is wrong with a standard human powered bike? I expect a global obesity epidemic in 10 years as people begin buying/building WALL-E-style beds.
mikestew8 minutes ago
Found the person who lives in Kansas. Sometimes I just want to ride to work without having to deal with that 2km hill on the way. And my bike is still human-powered, with electric assist. Do you not know how e-bikes work, perhaps?

Signed, former Cat 2 road racer

askvictorabout 1 hour ago
People with knee problems, areas with hills. An ebike is still active movement; sure you're not getting any cardio, but it's immeasurably better than driving. If this (or any ebike) is a thing that gets someone on a bike that otherwise wouldn't be on a bike, it is a good thing. For some it might be a stepping stone, for others it allows them to ride where they can't/won't ride at all.
uwagarabout 2 hours ago
i have a folding cycle and a fat bike. my only two devices still analog and keep me reasonably fit. i dont wanna e-bike them. but if i wanna long distance, this could be nice.
lostloginabout 2 hours ago
It only gives a boost for 50km.
Advertisement
UltraSaneabout 2 hours ago
These suck, just buy an e-bike they are awesome.
rumblefrogabout 2 hours ago
These would be great for many places that have storage restrictions on e-bikes, but not normal bikes. So you can easily detach and bring with you before storing it.
saghmabout 2 hours ago
The idea of being able to quickly switch a bike back and forth between a regular one and an e-bike seems cool. They lost me at the "smart" though...
dominotwabout 2 hours ago
any particular one you recommend in usa

my costco has magnum melody

UltraSaneabout 1 hour ago
Pretty nice bike. I bought a Evelo with a belt drive and a automatic CVT transmission that is really nice to ride.
singpolyma3about 3 hours ago
lol. A friction drive in current year?
numpad0about 3 hours ago
How do these things work legally? Wouldn't the bolt on process count as manufacturing or modifying a motorcycle, depending on where you are?
dsr_about 2 hours ago
In the USA, there are more than 52 jurisdictions not including towns and cities and counties, but most (not all) states think of ebikes as being slightly restricted bicycles rather than motorcycles, as long as:

- they have functional pedals (otherwise it's a motorcycle of some kind)

- they require pedal assist at all times and have some kind of power or speed limitation (anyone can use this, or at least it is least restricted)

- they have pedal assist available and have a different, higher power or speed limitation (usually reserved for 16+ or something similar)

- they have a power or speed limitation that makes them suitable for adults only but doesn't require a driver's license or inspection

There are efforts to regularize these, and also efforts to make things more chaotic. For example, New Jersey decided that all ebikes require a new ebike license and vehicle registration. Across the river in New York, no ebikes require a license or registration, and may be operated on any street which has a 30mph speed limit or less... but cities are allowed to make their own rules.

California's laws are mostly regarded by bicyclists as being sensible, at least in every discussion I've seen that didn't feature a twelve year old trying to convince his parents to buy him a 70mph electric motorcycle. See https://thecyclistchoice.com/resources/california-ebike-laws...

SoftTalkerabout 2 hours ago
They should require insurance at least. An ebike can cause serious injury to a pedestrian.
olyjohnabout 2 hours ago
So can a regular bike. Human powered bikes regularly blow past me when I'm doing the 15mph speed limits on the bike paths.
crummyabout 2 hours ago
That’s the same as a pushbike right?
TylerEabout 2 hours ago
So can a non-ebike. A couple of hundred pounds hitting you at 15-20mph is gonna suck no matter how it's powered.
Zigurdabout 2 hours ago
Poor people commute on e-bikes. Think twice before making laws that raise the cost and give cops a reason to hassle people.
walrus01about 3 hours ago
In most jurisdictions it's only a motorcycle if it can exceed a certain speed or has a motor over a certain power in kilowatts. Or some combination of both.

recent news: https://www.bbc.com/news/articles/c89nyk4pz74o

IshKebababout 3 hours ago
There's no restriction on manufacturing e-bikes anywhere that I know of, as long as they obey the speed/power limits. (That's why it says 500W "peak" power - the continuous power limit in the UK at least is 250W but manufacturers just make the "peak" last for a very long time.)