Back to News
Advertisement
Advertisement

⚡ Community Insights

Discussion Sentiment

88% Positive

Analyzed from 567 words in the discussion.

Trending Topics

#motors#more#motor#robot#dog#high#drone#video#hardware#getting

Discussion (16 Comments)Read Original on HackerNews

abelsm11 minutes ago
Awesome video. It's interesting, informative, and entertaining.

Founders I talk to that are doing hardware, broadly speaking, say it's a competitive advantage as it's not as crowded. Content like Aaed's will hopefully nudge more people into it.

Animatsabout 2 hours ago
3 DOF per leg, so it needs 12 motors and controllers. Getting that under $1000 is nice.

Here's the US$18 motor: [1] Those things are getting really cheap. He did have to rewind it, though, for more turns with thinner wire. The manufacturer mentions that you can order with "custom Kv", which means you might be able to get a different winding from the factory if you order a reasonable quantity. Especially if you tell them that makes them "robot motors".

Motor overheating might be a problem. The dog, just standing, has its motors stalled under load, converting power to heat. Drones don't do that. Temperature feedback would help if this thing has to operate for extended periods. Remember yesterday's article on humanoid robots and their cooling problems.

The motor controller is nice too, and cheap at $49. Needed fixes to the firmware, but that's not surprising at the price. High performance motor controllers used to cost about $1000.

Repurposed drone technology has done wonders for legged robots. We're not quite at the point where limb drive hardware is off the shelf, but it's way better than it used to be.

[1] https://www.xntyi.com/tyi-5008-kv335/kv400-high-speed-brushl...

barrenkoabout 2 hours ago
Could I pursuade you to expand on "Repurposed drone technology has done wonders for legged robots." ? Thanks!
cyanf11 minutes ago
For legged, you want high torque and backdriveability (for shock absorption).

Agricultural drone motors like the eaglepower 8308 are ideal.

They’re cost effective, (~$80 from aliexpress) & you can pair them with a 3d printed cycloidal drive to fulfill both requirements.

Industry actuators are an order of magnitude more expensive than this.

Extra: If you go down this path, you’ll need a driver. The Xdrive is frequently recommended, but there’s a clone that’s significantly cheaper: https://makerbase3d.com/product/makerbase-xdrive-mini-high-p...

cyanf10 minutes ago
franciscop29 minutes ago
Look at the original video/article, they used drone motors for the robot dog, by reusing the rotor/stator and rewinding the coils manually.
rmastabout 2 hours ago
If you read the epilogue, they weren't able to achieve the under $1000 price goal. Total cost ended up being around $1,450. Pretty good price reduction compared to CARA 1.0 though.

Hypothetically if I were to want a quadrupedal robot to experiment with it's not an impulse buy/build, but getting closer to that point... whereas $3000+ is a hard pass (e.g. Apple Vision Pro territory).

shutterkiller28 minutes ago
The mechanical simplicity here is appealing. A lot of robot dog projects feel optimized for demos first; this looks more grounded in maintainability.
KaiserProabout 1 hour ago
I love Aaed. Not only are the youtube video excellently produced and well researched, the website is a mine of information.

This is spectacular as a reference, which youtube isn't

pbmonsterabout 2 hours ago
The jumps are pretty impressive, this thing has some power. I'd be very curious how fast you could get this dog with some reinforcement learning for a proper transverse gallop gait - and if it converges towards a gallop naturally, or if it discovers some other fast gait patterns during learning.

Depending on the max speed of the motors/legs, giving it longer foot pads might be necessary for a good gallop. Intuitively, it looks a bit... "low gear" in the videos.

Springtimeabout 2 hours ago
I like the wide layout of the site but just on a readability front on a widescreen monitor after the opening more narrow paragraphs it changes to full width text layout and those could benefit from a `columns: 2` in CSS to split them since reading long width paragraphs is a bit difficult.
RoxiHaidiabout 2 hours ago
That's impressive! good job
npodbielskiabout 2 hours ago
Seeing stuff like this, I am wondering why the hell I am doing software. This is much cooler than CRUD for DB data nth time.
voidUpdate18 minutes ago
Hardware can be quite expensive and time-consuming, instead of just writing code (free) and running a command to deploy (quick) you have to get hold of good motors (expensive) and design and manufacture parts (slow)
npodbielski10 minutes ago
You do not have to convince me! I already love it!
igleriaabout 1 hour ago
Same. I do have an excuse due to lack of space in my apartment, but once we move...